[63]  Song, J.H., Choi, K.H., Dai, R., Choi, J.O., Ahn, S.H., Wang, Y., TBD, "Controlled Kinetic Monte Carlo Simulation of Laser Improved Nano Particle Deposition Process," Powder Technology (Under revision, Updated: 9/25)..


[62]  Kim, H., Park, Y., Chu, W.S., Ahn, S.H., Chun, D.M. and Lee, C.S., Submitted, "Kinetic spraying of silver nanowire blended graphite powder to fabricate transparent conductive electrode and their application in electrochromic device," Surface & Coatings Technology (SCIE, ISSN: 0257-8972, IF 2.589)..


[61]  Song, J.H., Sonkaria S., Ahn, S.H., Lee, C.S., Khare, V., Submitted, "Tuning inter-crystalline void-like defects in nanowire clusters to TiO2 quantum wires with enhanced photocatalytic performance," Applied Catalysis B: Environmental (SCI, Submitted, Updated:12/22)..


[60]  Pandey, J.K., Hitoshi Takagi, M.S.A. Bistamam, Antonio Norio Nakagaito, Ahn, S.H. , Submitted, "Bio-inspired Reinforcement of Biodegradable Polycaprolactone (PCL)-Starch Matrix by Nano-cellulose," Composite Science and Technology./span>.


[59]  Choi, D., Lee, M., Kim, H., Chu, W.S., Chun, D.M., Ahn, S.H. and Lee, C.S., 2017, "Investigation of Dry-deposition Ion Storage Layers using Various Oxide Particles to Enhance Electrochromic Performance," Solar Energy Materials and Solar Cells, Accepted (SCI, ISSN: 0927-0248, IF 4.784)..


[58]  Pawar, R.C., Kang, S.H., Park, J.H., Kim, J.H., Ahn, S.H. and Lee, C.S., 2017, "Evaluation of a multi-dimensional hybrid photocatalyst for enrichment of H2 evolution and elimination of dye/non-dye pollutants," Catalysis Science & Technology, Vol. 7, Issue 12, pp. 2579-2590 (2017)..


[57]  Ahn, S.H., Choi, J.O., Lee, H.T., Song, J.H., Kim, M.S., Yoon, H.S. and Suk-Won Cha, 2017, "Effect of laser-excited ceramic nanoparticles on hardness and porosity of dry-sprayed coating ," CIRP Annals Manufacturing Technology, Elsevier (Netherlands), Vol.66, No.1, pp 519-522 (SCI(E), IF 2.893, JCR Impact Factor Rank: 7/44 (2016) in ENGINEERING, INDUSTRIAL)..


[56]  Kim, H., Choi, D., Kim, K., Chu, W.S., Chun, D.M. and Lee, C.S., 2017, "Effect of particle size and amorphous phase on the electrochromic properties of kinetically deposited WO3 films," Solar Energy Materials and Solar Cells, Article in press (SCI, ISSN: 0927-0248, IF 4.784)..


[55]  Lee, H.T., Kim, H.J., Kim, C.S., Kenji Gomi, Minoru Taya, Shuhei Nomura and Ahn, S.H., 2017, "Site-Specific Characterization of Beetle Horn Shell with Micromechanical Bending Test in Focused Ion Beam System," ACTA Biomaterialia, Elsevier (Netherlands), Vol.57, pp.395-403, July 15, (SCI, IF 6.319, DOI: 10.1016/j.actbio.2017.04.026, ISSN: 1742-7061, JCR Impact factor Rank 3/77 (2016) in Engineering, Biomedical), Top 4% in Engineering, Biomedical..


[54]  Yoon, H.S., Jang, K.H., Kim, E.S., Lee, H.T., and Ahn, S.H., 2017, "Hybrid 3D Printing by Bridging Micro/Nano Processes," Journal of Micromechanics and Microengineering, IOP Publishing (England), Vol. 27, No. 6, P.065006, June (SCI, IF 1.768, DOI: 10.1088/1361-6439/aa6758, ISSN 0960-1317, Publication date (Web): April 27, JCR Impact Factor Rank: 44/135 (2015) in MECHANICS)..


[53]  Yoon, H.S., Lee, H.T., Kim, E.S., and Ahn, S.H., 2017, "Direct printing of anisotropic wetting patterns using aerodynamically focused nanoparticle (AFN) printing," Applied Surface Science, Elsevier (Netherlands), Vol. 396, 28 February 2017, Pages 1450?457 (SCI, IF 3.150, DOI: 10.1016/j.apsusc.2016.11.187, ISSN: 0169-4332, JCR Impact Factor Rank 1/18 (2015) in MATERIAL SCIENCE, COATINGS & FILMS), Top 6% in MATERIAL SCIENCE, COATINGS & FILMS..


[52]  Yoon, H.S., Kim, C.S., Lee, H.T., and Ahn, S.H., 2017, "Advanced scanning paths for focused ion beam milling," Vacuum, Elsevier (Netherlands), Vol.143, pp.40-49, September (SCI, IF 1.558, DOI: 10.1016/j.vacuum.2017.05.023, ISSN: 0042-207X, JCR Impact Factor Rank 146/271 (2015) in MATERIALS SCIENCE, MULTIDISCIPLINARY)..


[51]  Pawar, R.C., Kang, S.H., Park, J.H., Kim, J.H., Ahn, S.H. and Lee, C.S., 2016, "Room-temperature synthesis of nanoporous 1D microrods of graphitic carbon nitride (g-C3N4) with highly enhanced photocatalytic activity and stability," Scientific Reports, Vol. 6, Article number 31147 .


[50]  Kim, H.S., Park, Y.C., Choi, D.H., Ahn, S.H. and Lee, C.S., 2016, "Novel fabrication of an electrochromic antimony-doped tin oxide film using a nanoparticle deposition system," Applied Surface Science, Vol. 377, pp. 370-375..


[49]  Pawar, R.C., Park, T.J., Choi, D.H., Jeon, K.W., Ahn, S.H. and Lee, C.S., 2016, "Stable and magnetically reusable nanoporous magnetite micro/nanospheres for rapid extraction of carcinogenic contaminants from water," RSC Advances, Vol. 6, Issue 41, pp.34297-34311..


[48]  Kim, H.S., Yang, S.K., Ahn, S.H. and Lee, C.S., 2016, "Effect of particle size on various substrates for deposition of NiO film via nanoparticle deposition system," Thin Solid Films, Vol. 600, pp. 109?118...


[47]  Pawar, R.C., Son, Y.H., Kim, J.R., Ahn, S.H. and Lee, C.S., 2016, "Integration of ZnO with g-C3N4 structures in core?shell approach via sintering process for rapid detoxification of water under visible irradiation," Current Applied Physics, Vol. 16, Issue 1, Pages 101?108..


[46]  Pawar, C.R., Kang, S.H., Park, J.H., Kim, J.H., Ahn, S.H., Lee, C.S., 2016, "Room-temperature synthesis of nanoporous 1D microrods of graphitic carbon nitride (g-C3N4) with highly enhanced photocatalytic activity and stability," Scientific Reports, Nature publishing group (England), Vol. 6, No. 31147, August (SCI, DOI: 10.1038/srep31147, ISSN: 2045-2322)..


[45]  Pawar, C.R., Park, T.j.,Choi, D.H.,Jeon K.W., Ahn, S.H., and Lee, C.S., 2016, "Stable and magnetically reusable nanoporous magnetite micro/nanospheres for rapid extraction of carcinogenic contaminants from water," RSC Advances, ROYAL SOC CHEMISTRY(England), Vol.6., pp.34297-34311, March, (SCIE, IF 3.289)..


[44]  Kim, H. S., Park, Y. C., Choi, D. H., Ahn, S.H., Lee, C.S., 2016, "Novel Fabrication of an Electrochromic Antimony-doped Tin Oxide Film using a Nanoparticle Deposition System," Applied Surface Science (Volumes 371 - 377 (2016))..


[43]  Kim, H.S., Yang, S., Ahn, S.H. and Lee, C.S., 2016, "Effect of particle size on various substrates for deposition of NiO film via nanoparticle deposition system," Thin Solid Films, Vol. 600, 1 February 2016, pp. 109?118..


[42]  Rajendra C. Pawar, Yeonho Son, Jongryul Kim, Ahn, S.H., Lee, C.S., 2016, "Integration of ZnO with g-C3N4 structures in coreeshell approach via sintering process for rapid detoxification of water under visible irradiation," Current Applied Physics, Volume 16, Issue 1, January 2016, Pages 101?108 (SCI, IF 2.212, ISSN: 1567-1739)..


[41]  Song, D.S., Choi, J.O., Ahn, S.H., 2016, "Room-temperature fabrication of flexible thermoelectric generator using dry-spray deposition system," Journal of electronic materials, springer US, pp. 1-5, January, 2016, (SCI, IF 1.798,DOI : 10.1007/s11664-015-4306-3, ISSN : 0361-5235)..


[40]  Park, S.I., Quan, Y.J., Kim, S.H., Kim H., Kim S., Chun, D.M., Lee C. S., Taya M., Chu, W.S.* and Ahn, S.H.*, 2016, "A Review on Fabrication Processes for Electrochromic Devices," International Journal of Precision Engineering and Manufacturing-Green Technology, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 3, No. 4, pp. 397-421 (SCI(E), IF 2.545, JCR Rank 16/132 in Engineering, Mechanical, ISSN: 2288-6206, DOI 10.1007/s40684-016-0049-8)..


[39]  Park, J.I., Lee, G.Y., Kim, C.S. and Ahn, S.H., 2016, "Flexible Ceramic-Elastomer Composite Piezoelectric Energy Harvester Fabricated by Additive Manufacturing," Journal of Composite Materials.,The American Society for Composites(U.S.A)., Vol.50, No.12, pp.1573-1579..


[38]  Pawar, R.C., Pyo, Y.J., Ahn, S.H. and Lee, C.S., 2015, "Photoelectrochemical properties and photodegradation of organic pollutants using hematite hybrids modified by gold nanoparticles and graphitic carbon nitride," Applied Catalysis B: Environmental Vol. 176?177, pp. 654?666..


[37]  R.C. Pawar, Y.J. Pyo, Ahn, S.H. and Lee, C.S., 2015, "Photoelectrochemical properties and photodegradation of organic pollutants using hematite hybrids modified by gold nanoparticles and graphitic carbon nitride," Applied Catalysis B: Environmental Vol. 176?177, pp. 654?666..


[36]  Seungkyu Yang, Hyungsub Kim, Rajendra Charandeo Pawar, Ahn, S.H., Lee, C.S., 2015, "Dielectric characteristics of a barium titanate film deposited by Nano Particle Deposition System (NPDS)," International Journal of Precision Engineering and Manufacturing, May 2015, Volume 16, Issue 5, pp 1029-1034 (SCI(E), IF 1.205, ISSN: 2234-7593)..


[35]  Sonkaria, S, Kim, H. T, Kim, S.Y., Kumari, N., Kim, Y. G, Khare, V., Ahn, S.H., 2015, "Ionic liquid-induced synthesis of a graphene intercalated ferrocene nanocatalyst and its environmental application," Applied Catalysis B: Enviromental, Volume 182, March 2016, Pages 326?335 (SCI, IF: 7.435, ISSN: 0926-3373) , IF 7.438 (top 7%)..


[34]  Rajendra C. Pawar, Young Pyo, Ahn, S.H. and Lee, C.S., 2015, "Photoelectrochemical properties and photodegradation of organic pollutants using hematite hybrids modified by gold nanoparticles and graphitic carbon nitride," Applied Catalysis B: Environmental, Volumes 176?177, October 2015, Pages 654?666 (SCI, IF: 7.435, ISSN: 0926-3373)..


[33]  Yang, S.K., Kim, H.S., Ahn, S.H., Lee, C.S., 2015, "The effect of the agglomerated microstructure of dry-deposited TiO2 eletrodes on the performance of dye-sensitized solar cells," Electrochimica Acta, Vol 166, 1 June 2015, Pages 117-123 (SCI, IF 4.504, ISSN: 0013-4686)..


[32]  Rajendra C. Pawar, Suhee Kang, Ahn, S.H. and Lee, C.S., 2015, "Gold nanoparticle modified graphitic carbon nitride/multi-walled carbon nanotube (g-C3N4/CNTs/Au) hybrid photocatalysts for effective water splitting and degradation," RSC Advances Issue 31, (SC(E), IF 3.708, ISSN: 2046-2069, DOI: 10.1039/C4RA15560B, Published online 27 Feb 2015)..


[31]  Kim, Hyungsub, Yang, Seungkyu , Rajendra C. Pawar, Ahn, S.H., and Lee, C.S., 2015, "Role of TiO 2 nanoparticles in the dry deposition of NiO micro-sized particles at room temperature," Ceramics International, ELSEVIER (ENGLAND), Vol. 41, Issue 4, May 2015, pp. 5936-5944 (SCI, IF 2.086, ISSN: 0272-8842)..


[30]  Lee, H.T., Kim, S. I., Park, J. M., Kim, H.J., Song, D.S., Kim, H.I., Wu, H. G., Ahn, S.H., 2015, "Shape Memory Alloy (SMA)-based Head and Neck immobilizer for Radiotherapy," Journal of computational design and engineering, Vol. 2, No. 3,pp. 176?82, July 2015, Elsevier (Netherlands), (ISSN: 2288-4300, DOI: 10.1016/j.jcde.2015.03.004), Google Scholar citation: 6..


[29]  Song,H.K., Sonkaria,S., Khare, V., Dong,K., Lee, H.T., Ahn, S.H., Kim,H.K., Kang,H.J., Lee,S.H., Jung,S.P. and Adams,J.M. , 2015, "Pond sediment magnetite grains show a distinctive microbial community," Microbial Ecology, Springer (USA), Vol.70, No.1,pp.168-174, July, (SCIE, IF 3.118, DOI:10.1007/s00248-014-0562-, ISSN:0095-3628)..


[28]  Ahn, S.H., Yoon, H.S., Jang, K.H., Kim, E.S., Lee, H.T., Kim, C.S., Lee, G.Y., Cha, S.W., 2015, "Nanoscale 3D printing process using aerodynamically focused nanoparticle (AFN) printing, micro-machining, and focused ion beam (FIB)," CIRP Annals Manufacturing Technology, Elsevier Science BV, Vol. 64, Issue 1, pp. 523-526, April (SCI(E), IF 2.541, DOI: 10.1016/j.cirp.2015.03.007, ISSN: 0007-8506, Publication date (Web): April 30, JCR Impact Factor Rank: 4/44 (2015) in ENGINEERING, INDUSTRIAL), Top 10% in ENGINEERING, INDUSTRIAL..


[27]  Park, S.I., Kim, S., Choi, J.O., Song, J.H., Ahn, S.H. and Taya, M., 2015, "Low-cost fabrication of WO3 films using a room temperature and low-vacuum air-spray based deposition system for electrochromic device applications," Thin Solid Films, Elsevier (Netherland), Vol. 589, pp. 412-418, (SCI, IF 1.759, DOI:10.1016/j.tsf.2015.05.070, ISSN 0040-6090, JCR Impact Factor Rank: 6/18(2013) in Materials science, Coatings & Films), Google Scholar citation: 5..


[26]  Chun, D.M., Gaasuren Davaasuren, Chi-Vinh Ngo, Kim, C.S., Lee, G.Y., Ahn, S.H., 2014, "Fabrication of Transparent Superhydrophobic Surface on Thermoplastic Polymer using Laser Beam Machining and Compression Molding for Mass Production,," CIRP Annals Manufacturing Technology, Technische Rundschau Edition Colibri Ltd. (Switzerland) (SCIE, Accepted, Updated: 03/10).


[25]  Yoon, H.S., Kim, E.S., Kim, M.S., Lee, G. B., and Ahn, S.H., 2014, "Energy Consumption of the Brushing Process for PCB Manufacturing Based on a Friction Model,," International Journal of Precision Engineering and Manufacturing, IJPEM, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 15, No. 11, pp. 2265-2272, November (SCI(E), IF 1.500, DOI: 10.1007/s12541-014-0590-8, ISSN: 2234-7593, JCR Impact Factor Rank: 33/128 (2013) in ENGINEERING, MECHANICAL).


[24]  Chu, W.S., Pandey, J.K., and Ahn, S.H., 2014, "Fabrication of Bio-composite Scaffold for Implantable Drug Delivery System (DDS)," Journal of Biobased Materials and Bioenergy - Special Issue, American Scientific Publishers, Vol. 8, No. 2, pp.230-239, April (SCIE, IF 0.826, jbmb.2014.1427, ISSN: 1556-6560, JCR Impact Factor Rank: 64/83 in Energy & Fuels (2013)), Cover Page.


[23]  Yoon, H.S., Lee, J.Y., Kim, M.S., and Ahn, S.H., 2014, "Empirical Power-consumption Model for Material Removal in Three-axis Milling," Journal of Cleaner Production, Elsevier Science ltd (England), Vol. 78, pp. 54-62, September (SCI(E), IF 3.590, DOI: 10.1016/j.jclepro.2014.03.061, ISSN: 0959-6526, JCR Impact Factor Rank: 29/216 (2013) in ENVIRONMENTAL SCIENCES), IF 3.590.

[22]  Chu, W. S., Kim, C. S., Lee, H. T., Choi, J. O., Park, J. I., Song, J. H., Jang, K. H., and Ahn, S. H., 2014, "Hybrid Manufacturing in Micro/Nano Scale: A Review," International Journal of Precision Engineering and Manufacturing-Green Technology, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 1, No. 1, pp. 75-92 (SCIE, ISSN: 2234-7593)


[21]  Pandey, J. K., Lee, H. T. ,Kim, C. S., Ahn, S. H., 2014, "Bio-inspired deposition of silver nano-particles (AgNPs) on silicon substrate," Materials Letters, 116, P.175-177. (Accepted


[20]  Park, J. I., Lee, G. Y., Kim, C. S. and Ahn, S. H., 2013, "Flexible Ceramic-Elastomer Composite Piezoelectric Energy Harvester Fabricated by Additive Manufacturing," Smart Materials and Structures (SCI, Submitted, Updated: 10/29)


[19]  Pandey, J. K., Choi, J. O., Lee, H. T., Kim, C. S., Hyun-Joong Kim, Sera Jeon, Ahn, S. H., 2013, "Cellulose nanofiber assisted deposition of titanium dioxide (TiO2) on fluorine-doped tin oxide (FTO) glass ," RSC Advances, 4(2), pp. 987-991. February (IF 2.562)


[18]  Chun, D. M., Kim, C. S., Choi, J. O.,Lee, G. Y. and Ahn, S. H., 2013, "Multi-layer Deposition of Ceramic and Metal at Room Temperature using Nano-Particle Deposition System (NPDS) and Planarization Process," International Journal of Advanced Manufacturing Technology, Springer, (SCI, IF 1.1, ISSN: 0268-3768, Accepted, Updated: 9/24).


[17]  Lee, J.W., Choi, J. O., Jeong, J.E., Yang, S.G., Ahn, S. H., Kwon, K.W., C. S. Lee, 2013, "Energy harvesting of flexible and translucent dye-sensitized solar cellfabricated by laser assisted nano particle deposition system," Electrochimica Acta, Elsevier, Vol. 103, pp. 252-258, July. (SCI, IF 4.039, http://dx.doi.org/10.1016/j.electacta.2013.04.050), IF 4.039.


[16]  Pandey, J. K., H. Takagi, D. R.Saini, A. N. Nakagaito,Ahn, S. H., 2012, "An overview on the cellulose based conducting composites," Composites Part B: Engineering, ELSEVIER SCI LTD. (England), Vol. 43, No. 7, pp. 2822-2826, October (SCI, IF 2.143, DOI: 10.1016/j.compositesb.2012.04.045, ISSN: 1359-8368).


[15]  Pandey, J. K., Sena Lee, Hyun-Joong Kim, Hitoshi Takagi, Kim, C. S., Ahn, S. H., 2012, "Preparation and properties of crystalline cellulose-modified layered silicate and compatibilzed polypropylene composites ," Journal of Applied Polymer Science WILEY-BLACKWELL (US) Vol. 125, Issue S1, pages E651–E660, July (SCI, IF 1.395, DOI: 10.1002/app.34546, ISSN: 0021-8995).


[14]  Pandey, J. K., Kim, C. S., Chu, W. S., Choi, W. Y., Ahn, S. H., 2012, "Preparation and structural evaluation of nano reinforced composites from cellulose whiskers of grass and biodegradable polymer matrix," Journal of composite Material, SAGE Publication Ltd. (England) Vol. 46, No. 6, pp.653~663, March (SCI, IF 0.936, DOI: 10.1177/0021998312438174, ISSN: 0021-9983).


[13]  Kim, Kwang-Su, Park, Shinyoung, Cho, Danee, Jang, Gyu-Beom, Ahn, Sung-Hoon, Lee, Caroline Sunyong, 2012, "Improved micro drill bit tool life using nano-scale SiC/Ni electroplating," Journal of Ceramic Processing Research, Korean Assoc Crystal Growth, Inc (South Korea), Vol. 13, No. 6, pp. 730-734 (SCI, IF.0.386, ISSN: 1229-9162).


[12]  Changhyun Pang, Lee, G. Y., Tae-il Kim, Sang Moon Kim, Hong Nam Kim, Ahn, S. H. and Kahp-Yang Suh, 2012, "A flexible and highly sensitive strain-gauge sensor using reversible interlocking of nanofibres," NATURE MATERIALS, Nature Publishing Group, advance online publication, July (SCI, I.F. 32.841, DOI:10.1038/nmat3380, ISSN : 1476-4660), I.F. 32.841, Citation by Google Scholar 39.


[11]  Kim, Y.H., Kim, K.S., Lee, J.W., Kim, M. S., Choi, J. O., Ahn, S. H. and C. S. Lee, 2012, "Fabrication of Dye-Sensitized Solar Cell (DSSC) Using Different Particle Sizes of TiO2 Deposited via Nano-Particle Deposition System (NPDS)," Journal of Nanoscience and Nanotechnology, American Scientific Publishers (USA), Vol. 12, No. 4, pp. 3478-3482, (SCI, IF 1.435, ISSN: 1533-4880).


[10]  Chun, D. M., Choi, J. O., C. S. Lee, Kanno, I., Kotera, H. and Ahn, S. H., 2012, "Nano-particle deposition system(NPDS) : low energy solvent-free dry spray process for metal and ceramics at room temperature," International Journal of Precision Engineering and Manufacturing, KSPE (Korea) Vol. 13, No. 7, pp. 1107-1112, (SCI, IF 1.060, ISSN 2234-7593).


[9]  Ahn, S. H., Choi, J. O., Kim, C. S., Lee, G. Y., Lee, H. T., Kyujin Cho, Chun, D. M., C. S. Lee, 2012, "Laser-assisted nano particle deposition system and its application for dye sensitized solar cell fabrication," CIRP Annals - Manufacturing Technology, Elsevier (Netherland), Vol. 61, No. 1, pp. 575-578 (SCIE, IF 1.708)


[8]  Chun, D. M., Choi, J. O.,Caroline S. Lee, Ahn, S. H.*, 2012, "Effect of stand-off distance for cold gas spraying of fine ceramic particles (< 5 m) under low vacuum and room temperature using nano-particle deposition system (NPDS)," Surface and Coatings Technology, Vol. 206, Iss. 8-9, 15 January 2012, pp. 2125-2132


[7]  Kim, M. S., Chun, D. M., Choi, J. O., Lee, J. C., Kim, Yang Hee, Kim, Kwang-Su, Caroline Sunyong Lee, Ahn, S. H.*, 2012, "Dry-spray deposition of TiO2 for flexible dye-sensitized solar cell (DSSC) using nano particle deposition system (NPDS)," Journal of Nanoscience and Nanotechnology, Vol. 12, pp. 3384-3388 (doi:10.1166/jnn.2012.5548).


[6]  Ahn, S. H., Chun, D. M., Kim, C. S., 2011, "Nanoscale Hybrid Manufacturing Process by Nano Particle Deposition System (NPDS) and Focused Ion Beam (FIB)," CIRP Annals - Manufacturing Technology, Elsevier (Netherland), Vol. 60, No. 1, pp. 583-586, (SCIE, I.F. 1.684, doi:10.1016/j.cirp.2011.03.071, ISSN: 0007-8506)


[5]  Kim, M. S., Chun, D. M., Choi, J. O., Lee, J. C., Kwang-Su Kim, Yang Hee Kim, Caroline Sunyong Lee and Ahn, S. H., 2011, "Room temperature deposition of TiO2 using nano particle deposition system (NPDS): Application to dye-sensitized solar cell (DSSC)," International Journal of Precision Engineering and Manufacturing, The Korean Society for Precision Engineering (Korea), Vol. 12, Issue 4, pp. 749-752, August, (SCI(E), IF 1.141, DOI: 10.1007/s12541-011-0099-3 ,ISSN : 2234-7593).


[4]  Chun, D. M., and Ahn, S. H.*, 2011, "Deposition mechanism of dry sprayed ceramic particles at room temperature using a nano-particle deposition system (NPDS)," Acta Materialia, Elsevier, Vol. 59, No.7, pp. 2693-2703, April (SCI, DOI: 10.1016/j.actamat.2011.01.007, ISSN: 1359-6454), IF 3.76.


[3] J.Y. Roh, Y.H. Kim, C.S. Lee, "Synthesis of MWNTs using thermal chemical vapor deposition for the application of a counter electrode for DSSCs", CURRENT APPLIED PHYSICS, 2011.01


[2] Y.H. Kim, M.S. Kim, K.S. Kim, S.H. Ahn, C.S. Lee, "Deposition of TiO2 layers for dye-sensitized solar cells using nano-particle deposition system", CURRENT APPLIED PHYSICS, 2011.01


[1]  Song, W. J., Kim, Y.H., Kim, M. S., Ahn, S. H., and Lee, C. S., 2010, "Fine-Sized Etching of Flexible Substrates Using Nano Particle Deposition System," Materials Transactions, The Japan Instiute of Metals (Japan), Vol. 51, No. 11, pp. 2099-2103, October (SCI, IF 0.795 DOI:10.2320/matertrans.M2010221, ISSN: 1345-9678) 


Copyright(c) 2010 Nano 3D Printing Lab.   ALL RIGHTS RESERVED.
Room 1402, Building 301, School of Mechanical & Aerospace Engineering,
Seoul National University, Daehak-Dong, Gwanak-Ro 599, Gwanak-Gu, Seoul, 151-742, Korea
TEL 82-2-880-9073, 82-2-880-1683, 82-2-886-9074, 82-2-887-9075   FAX 82-2-888-9073